1. The Washing Machine Won’t Power On
- Check if the power socket is working.
- Ensure the fuse and circuit breaker are intact.
- Inspect the control panel for wiring issues.
- Reset the machine by unplugging it.
2. Water Not Draining Out
- Remove debris from the drain pump filter.
- Ensure the drain hose is not clogged or kinked.
- Check if the pump motor is functioning properly.
- Adjust the drain pipe height if necessary.
3. Loud Noises During Operation
- Remove foreign objects stuck in the drum.
- Balance the washing machine on a level surface.
- Inspect and replace worn-out bearings.
- Tighten loose components.
4. Machine Vibrating Excessively
- Place the machine on an even surface.
- Distribute clothes evenly inside the drum.
- Inspect the shock absorbers for wear.
- Check for loose or damaged suspension springs.
5. Spin Cycle Not Functioning Properly
- Confirm the spin cycle settings are correct.
- Check for a worn-out belt or motor coupling.
- Ensure the lid switch or door lock is working.
- Look for error messages on the display.
6. Water Leaking from the Washing Machine
- Inspect hoses for cracks or loose fittings.
- Clean the detergent drawer to remove clogs.
- Check the rubber door seal for dirt or blockages.
- Ensure the water pump is not leaking.
7. Detergent Not Dissolving Properly
- Use the recommended detergent for your machine.
- Check if the detergent tray is clogged.
- Ensure the water temperature is appropriate.
- Inspect the water inlet valve for any blockages.
8. Washing Machine Stops Mid-Cycle
- Check for power fluctuations.
- Inspect the control panel and timer.
- Make sure the washing machine door is securely closed.
- Restart the machine after a reset.
9. Foul Smell from the Washing Machine
- Run a hot water cycle with vinegar or a cleaner.
- Wipe the detergent tray and rubber gasket regularly.
- Leave the washing machine door open after use.
- Remove and clean the lint filter frequently.
10. Display Panel Showing Error Codes
- Consult the user manual for error details.
- Reset the machine by unplugging it.
- Check for faulty sensors & wiring issues.
- Contact HouseTriangle for expert assistance.